SILL XTREME 26cm Brush - Flocked
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories

SILL XTREME 26cm Brush - Flocked

Available: In Stock
  • Product SKU: GR26SXF
€54.00
Image
  • Lightweight Xtreme™ Sill brush
  • New - Stiffer corner bristle bunches for improved edge & corner cleaning
  • Good for cold or warm water
  • Lightweight Window Cleaning Brush - 140g
  • Optional clip-on Side Brush Bumpers available (adds 7g)
  • Comes with 1 set of Jet Capsules of your choice in the price
  • If using fanjets, some bristles may need trimming to allow full spray width
  • Supplied with T Connector & Jet Hose if jets selected

Xtreme™ Sill – Our lightest Sill brush – everything pared down to the bare minimum to provide good window & sill cleaning with no extra weight. Comes complete with new Side Bumpers. For those who need light weight above longevity.

  • Lightweight Xtreme™ Sill brush
  • Good for cold or warm water
  • Lightweight Window Cleaning Brush - 140g
  • Optional clip-on Side Brush Bumpers available (adds 7g) - can be glued on for durability
  • Comes with 1 set of jet capsules, jet hose and T Connector in the price
  • Water temperature suitability= Up to 35°
  • Important: These brushes need 13mm screws to be used when fitting a brush socket - not the standard 16mm screws
  • If using this brush on a pole with a Swivel Gooseneck  - you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
  • If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve  - you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
  • Six month manufacturing defect warranty
  • Lightweight Xtreme™ Sill brush
  • New - Stiffer corner bristle bunches for improved edge & corner cleaning
  • Good for cold or warm water
  • Lightweight Window Cleaning Brush - 140g
  • Optional clip-on Side Brush Bumpers available (adds 7g)
  • Comes with 1 set of Jet Capsules of your choice in the price
  • If using fanjets, some bristles may need trimming to allow full spray width
  • Supplied with T Connector & Jet Hose if jets selected
Description

Xtreme™ Sill – Our lightest Sill brush – everything pared down to the bare minimum to provide good window & sill cleaning with no extra weight. Comes complete with new Side Bumpers. For those who need light weight above longevity.

  • Lightweight Xtreme™ Sill brush
  • Good for cold or warm water
  • Lightweight Window Cleaning Brush - 140g
  • Optional clip-on Side Brush Bumpers available (adds 7g) - can be glued on for durability
  • Comes with 1 set of jet capsules, jet hose and T Connector in the price
  • Water temperature suitability= Up to 35°
  • Important: These brushes need 13mm screws to be used when fitting a brush socket - not the standard 16mm screws
  • If using this brush on a pole with a Swivel Gooseneck  - you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
  • If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve  - you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
  • Six month manufacturing defect warranty